1 / 2
Inkbird ISV-100W Sous Vide Bottom Cap
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Lost the clear bottom cover that goes around the impeller on my ISV-100W. Modeled this up to replace it.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 114
- Makes
- 0
- Views
- 575
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
The model is one STL, but can be split into parts/objects to print the body and the tabs separately, helpful if your supports aren't perfectly dialed in. The parts can then be glued into the body, (I used ABS glue…super glue, solvent weld, etc. probably work fine too, it's a ton of surface area for not much strength needed).