Double Filament Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a double Filament holder with a guide/light mount
- Rating
- 4 / 5
- Likes
- 8
- Downloads
- 41
- Makes
- 1
- Views
- 623
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a double filament holder I designed. It has 3 different guide options, one that is just a guide, one that is a guide with a light mount and one that is just a light mount. I have included a test print to make sure your settings are right for the little guides inside of the Filament mount for the Filament roller. The light I am currently using is https://www.amazon.com/gp/product/B08C9V8RMT/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 . I may have forgotten to orientate the models correctly, I tried to get them so sorry if I missed one or 2. The Filament Mount and test print is best printed while laying on its side, but I have had luck with it standing straight up. I would suggest printing the test print is whichever orientation you plan to print the Filament mount in. The filament holder is best printed slightly tilted, but use your best opinion. The Roller and Center roller are best printed standing up. All of the filament guides and light mount are best printed laying down. \
Print Recommendations:
Layer Height: .2 mm
Walls: 3
Infill: 20%
Supports: Depends on part(Will mark each with recommendation)
bed plate adhesion: not recommended, but use your best opinion
Other Hardware needed:
Screws:
2 M3x8 or M4x8 with T nut to attach mount to bar
2 M3x10 or M4x10 with T nut to attach guide or light mount and add extra support for the mount.