Lid for wheat beer glasses (German: "Weizenbier", in Bavaria also “Weißbier”) with your own name
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.73 – €0.89 net (excluding VAT)
For file: weizenbierglasdeckel_v5.5_2colorchange_0.2mm_PETG_MINI_53m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.81 excluding VAT (range midpoint).
- Weight reported by the author
- 9 g
- Print time reported by the author
- 53.4 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Lid for wheat beer glasses (German: "Weizenbier", in Bavaria also “Weißbier”) with your own name, customizable.
- Rating
- 4 / 5
- Likes
- 35
- Downloads
- 374
- Makes
- 2
- Views
- 1,178
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Lid for wheat beer glasses (German: "Weizenbier", in Bavaria also “Weißbier”). These lids fit glasses that have a thick glass rim with a diameter of 80 mm, and taper towards the opening (as on the cover picture). The hinge height can be changed for glasses that widen.
- Easy to print
- Name on the top of the lid
- Additional lettering on the bottom side is possible if the lid height is sufficient
For shorter printing time the lid is now thinner and has a reinforced edge (pictures from the older version)
I would be happy about a make picture with filled beer glass :-) Cheers!
Open the file in OpenSCAD. There under "Window" uncheck the entry "Hide Customizer".
If you can print in two colors, create one STL each for clamp, lid and text.
If you can only print in one color, create the STL for the lid and text together. You can then set one or two color changes in the slicer.
Use PETG so that the lid will survive the dishwasher.