LayersFactory
Report model
1 / 9
Astroberry Case — image 1
1 / 9

Astroberry Case

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Model information

Source
Printables
Category
Physics & Astronomy
License
Creative Commons — Attribution — Noncommercial — Share Alike
DetailsMakes & commentsRemixesCollectionsRelated

A case for your Astroberry project

 

This rugged case is for a Raspberry Pi 4B with a mounted heatsink like this one:
https://amzn.eu/iCX0Fwg or https://amzn.eu/hAALRce
This case has outputs for the 4 USB-A ports and the USB-C port. Everything else is closed and protected from the weather.
Despite the housing, the RaspberryPi stays pretty cool thanks to the large heat sink and a 30x30x7 fan.
It consists of 2 parts that are pushed into each other and finally snap into place. So no screws are needed and the case doesn't look like DIY :)
At the bottom there are 2 M4 connection threads, I use them to mount a Dovetail for the KeenOne EQ mount. https://www.printables.com/de/model/273812-keen-one-harmonic-drive-eq-mount

Dovetail: https://www.printables.com/de/model/304131-different-dovetail-for-controller

 

Dimensions: 

  • Length: 94.5mm 
  • Width: 64mm 
  • Height: 40mm

 

BOM:

  • 4x M2.5x12 Screw for mounting the RPi with heatsink
  • 2x M4 hex nut for attaching the housing to astronomical equipment
  • 1x Raspberry Pi 4B
  • 1x heat sink https://amzn.eu/iCX0Fwg or https://amzn.eu/hAALRce
  • 1x 30 x 30 fan up to max. 7.5mm height, 5V

 

Happy printing :)

Tags

telescopeastrophotographyraspberrypiraspberrypicaseastronomytelescopeastroberry