1 / 1
Spacer for "BREACHER" Pico 4 VR magnetic Gunstock — image 1

Spacer for "BREACHER" Pico 4 VR magnetic Gunstock

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Just a spacer to use 20x4mm magnets on BREACHER gun stock instead of the 30x5mm listed.

Rating
0 / 5
Likes
3
Downloads
23
Makes
0
Views
1,175
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

BREACHER: https://www.printables.com/model/309498-breacher-pico-4-vr-magnetic-gunstock

V1 has the magnet sitting 1mm below the surface, V2 has it flush. 

It is probably best to use V2 both in hexaplate and controller cup to have the magnets touch and then fine tune the grip using electrical tape or smth in between. 

Having V1 on other side and V2 on the other (1mm air gap between) produces weaker grip that might be desirable. YMMV.

V1 on both sides (2mm air gap between magnets) is definitely too weak, not recommended.