Led Light Bar for Ender 3 Max; 12.5mm ledstrip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A set of files for 12.5mm led-strips to be used instead of the original 10mm version. Also a long one for Ender 3 Max.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 58
- Makes
- 0
- Views
- 600
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
This is a remix of the original model provided by Printornaut, but is intended for 12.5mm strips. Particularly a model sold by a well-known german DIY-store that works on 24Volt and has 16.7mm segments to work with.
The three files provided are:
- A remix of the original version, just made 12.5mm wide; 163mm long
- A version 183mm long; suitable for one 16.7mm led-strip segment; still fits Ender3 X-axis
- A version 351mm long; suitable for the top-bar of an Ender3 Max. Fits diagonally across the bed (on a max ;)
In the process of remixing, I wasnt able to keep the logo that was included with the original so I opted to delete that geometry and go for a simple rectangle face there, instead. This was not my intent and it is not an attempt to strip the original author of recognition. Just all I could easily achieve with an STL-file.
As with the original: the best way to print it is to print it with the ‘flat’ segment down; adding a little bit of support-material for the clips to be printed properly. Default Cura-settings for Ender3 Max worked well for me, using .4mm nozzle and .12mm layerheight.
The pictures shown are lighted with TWO 351mm ledbars on either side of the top-most extrusion. A direct light on the X-axis gantry is still to follow.