Utensil Handle - Revereware Remix
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I rescaled and tweaked the original, to allow me to slide the handle of either a Revereware fork or spoon into the slot.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 28
- Makes
- 0
- Views
- 162
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Public Domain
I am very impressed by the original design of this handle, but my inlaws have RevereWare cutlery, which would not fit into the slot in the original handle.
Here, I have scaled the original up to 120% and have re-cut the slot, to be open on one side. Now, one can slide either a fork or a spoon into the slot, as one wishes.
Not as elegant as the original, but functional.
Printed well in transparent black PETG, with 20% Gyroid infill and Fuzzy Skin.
Used supports to allow printing it in the original orientation, which leaves any rough surface away from the hand and ensures that the edge of the slot is reasonably strong. [NOTE: PETG also sands easily, if you need to smooth any roughness.]
Licensed for the Public Domain, as is the original model.