1 / 6
Voron 0 Waveshare 3.5" Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount for a Waveshare 3.5" screen for the Voron 0.
- Rating
- 4.5 / 5
- Likes
- 40
- Downloads
- 157
- Makes
- 3
- Views
- 1,738
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
This mod will allow you to mount a 3.5" Waveshare on a Voron 0 so that you can use KlipperScreen.
BOM
- 3.5" Waveshare screen
- 4 M3x6 screws (Fasten front mount to back mount)
- 2 M3x6 screws (Fasten mount to frame)
- 2 M3x6 screws (Fasten 2 skirt parts to frame)
NOTE
The parts are in the recommend print orientation.
Installation
- I created a wiring harness to connect the following pins from the Pi (I'm using a Pi Zero 2 W) to the display:
- Insert the screen into the front part
- Line up the back part and fasten with 4 M3x6 screws
- Line up the screw holes on the mount to the nuts in the bottom extrusion of the frame
- Fasten the mount with 2 M3x6 screws
- Fasten the 2 skirt parts to the frame.
- Profit
Images
Also, check out my Voron 0 Wide Stance feet.