1 / 4
54mm Portafilter Funnel
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
54mm portafilter distribution funnel. Friction fit requires no magnets. Internal lip prevents stuck grounds.
- Rating
- 4.5 / 5
- Likes
- 22
- Downloads
- 257
- Makes
- 3
- Views
- 1,639
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Share Alike
54mm Portafilter Funnel
Tested and Compatible Machines
- Starbucks Barista
- Saeco/Starbucks Via Venezia
Design Features
- Small internal lip to prevent stuck grounds
- Light friction fit requires no magnets
- 65 degree taper
- Minimal curved design
- No supports required
Printing Recommendations
You may need to fiddle around with scaling to get the desired fit. The current model represents what works on my printer.
- 0.2mm layer height
- 0.4mm layer width
- PETG
- Print with wide opening down
The rest aren't picky, but I use:
- 3 perimeters
- 20% infill
- No supports
- Middle slicing tolerance
Change Log
V4
- Decreased diameter by 0.2mm for better fit.
- Halved the stl size.
- Removed the small stl.
- Added more details to the description.