Counting matching models…
This little tool can help you for an even extraction of the espresso. This coffee needle distribution tool doesnt need any other material than the fillament of your 3d printer. The assembly is straight forward: put the needles through the…
Evemodel Power Distribution Board Case Just updated Dray's original to add cutouts for ventilation and slide-on cover.
This is my try of making a DIY Victron MP2 compatible DC-distribution. It's based of a 40x8mm copper rail which can carry according to DIN EN 61439 1300A. The whole design is inspired by the Victron Lynx but with the requirement of…
I wasn't happy with the available 10-inch rack mount PDU options, so I created my own. Bill of Materials: 4 x M3x6mm Socket Head Cap Screws 4 x M3x5x4 brass heatset inserts 6-way IEC outlet module:…
Power Strip / Power Distribution for XT60 connectors. Multiple models are available. Variations include: 2 through 6 Female XT60 Outputs with 1 XT60 Male Input. Optional Power Switch. Optional Mounting Tabs for all Variations. The model…
A great tool for anyone looking to achieve precise, professional-level coffee preparation! This practical coffee distributor is designed to evenly distribute coffee grounds before tamping. It's perfect for those looking to achieve…
Elevate your coffee game with this Adjustable Coffee Leveling Distributor . Easily set the depth for perfect, even grounds before tamping, ensuring consistent, rich espresso shots. Adjustable Depth: Customize from 5-10mm. Even Grounds…
I can't stand the way the coffee from my grinder always falls on my counter and the wet shot glasses make a mess that I gotta wipe up. This thing aims to fix both. The shot glass portion has risers so if you put a wet shot glass in,…
Mount for CEE EU power split / distribution box / schuko verteiler a simple way to screw and fix the typical 3/4/6 way CEE power splitters
Even though there are lots of WDT tools on Printables here are the reasons I created one myself; I don't want plastic moving parts because friction will inevitably cause micro plastic particles in the espresso I like manual control and…
It's a basic plate for the most generic type of espresso needle distribution tool to protect the needles and hold up the ground coffee stuck to it. There arealso holes for silicone pads on the bottom.
Distribution box for Wago terminals. Distributor for two ceiling lamps
This model depicts Karl Marx in a deliberately unexpected form — a kneeling, angelic figure holding an envelope. It’s not meant to be a historical representation. It’s a piece of satire built on cultural contrast. 🧠 Concept The idea plays…
For my light track system with 2 separate connections, I needed a power distributor for the ceiling with 2 outputs for the cables . Boxes with 1 outlet are available at hardware stores - but not with 2 outlets. Since my kids are out of…
Standoff/insulator for this Amazon power distribution block: https://www.amazon.com/gp/product/B0B3TCBFKH/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
This versatile 3D-printable wall vase is designed for both wall mounting and standalone use. Whether you choose to hang it on your wall or place it on a flat surface, this vase adds a touch of elegance to any room. Features:…
Redesigned Frame and Assembly for Improved Ergonomics I redesigned the frame to position the Arduino below the handwrest, allowing the main assembly to be lowered. This design change, along with the addition of a hand rest, eliminates the…
This thing was crowd designed by the members of the Espresso Aficianados Discord . If this design or espresso interests you, hop in and say hello! The Tool A nine pronged WDT tool. This was designed for 0.4x75mm 0.35x75mm acupuncture…
Wall Vase with integrated Water Distribution System
The attached gcode files do not have color change set. I glued the bottom of the case to the top.
Lipedema is a chronic disease of lipid metabolism that results in the symmetrical impairment of fatty tissue distribution and storage combined with the hyperplasia of individual fat cells. Lipedema occurs almost exclusively in women and…
Fluid Distribution Cap for Hydroponic Agriculture applications or a Microgreen Machine. Distributes water to up to 8 ways. It is designed to work with 1.5" (1 ½") PVC pipe threads, and 0.25" (¼") standard rubber irrigation hoses.
Uses a PUG for cable strain relief https://www.printables.com/model/378567-pug-parametric-umbilical-gland Uses https://www.printables.com/model/506687-wago-221-415-mount to mount wagos. Mounts into…
Distribution tool for portafilter 58mm Print Settings Rafts: No Supports: No **Resolution:** 200 Infill: 100 **Filament:** eSun ABS Category: Kitchen & Dining
A case for the Duet Tool Distribution Board v0.5 (the only version they have as of Jan 2025) that allows the Tool Distribution Board(TDB) to be mounted with M5 screws. The case has a bottom plate that needs M3 heatset inserts. I used the…
The Coffee Comb is a simple yet effective tool for espresso enthusiasts. Designed to break up clumps and evenly distribute coffee grounds in the portafilter, it improves extraction consistency. The model is optimized for PLA printing and…
A small 60mm by 180mm panel with 4 C14 plugs to use for power outlets.
Fysetc Stealthchanger Distribution Board Bracket for din rail adaptation. It's the black piece between the din rail adapter and board.
Ein einfaches WDT- Tool und magnetischer Trichter für 58mm und ein Ständer für beides. Braucht wenig Platz und schafft Ordnung. Es braucht dazu: 1 Kabelbinder (nicht zwingend aber sehr hilfreich) 5 Stück 0.4mm Akupunkturnadeln für…
extended the top opening on the 51x20x3x32 version to act as a funnel, making it easier to pour the ground coffee in. I swapped the filter basket and portafilter body on my Dedica, but this model still fits the original parts. While…
An N-scale version of the HO-scale distribution center crafted by Kabrumble. I started designing it shortly after Kabrumble posted his file many months ago, then forgot all about it until another modeller ( jeff_j3ffr3y) posted their…
For installing a thick 4 x 6mm2 YMvK-AS ground cable I needed a right-angled M32x1.5 cable gland to feed the cable from the floor to an Eaton System 55 distribution box. One could buy one, but in my case delivery time was weeks and…
Simple case for the Range Video RV-Splitter 4-way Composite Video Distribution Amplifier: https://www.rangevideo.com/products/rv-splitter-4-way-composite-video-distribution-amplifier Assembles using 4 m2.6 x 12mm screws. I also sell these…
The idea behind the model, is to have an adapter that fits inside the Wilfa Uniform grinder to fill a Bialetti 3-cup funnel with coffee directly. It also includes a distribution tool that perfectly and uniformely fills the funnel. Step 1:…
If you want to chop and distribute your coffee grounds before tamping so that no channeling occurs when the coffee is drawn, then this tool is the right one for you. You don't need expensive needles, you can simply use a standard 0.9mm…
I was not happy with the factory oiling solution for the power feed / threading gearbox on my Enco lathe so I designed this. All oil ports are now in one location and sealed from chips or debris. I doubt anyone will ever need these…
This little tool can help you for an even extraction of the espresso. This coffee needle distribution tool doesnt need any other material than the fillament of your 3d printer. The assembly is straight forward: put the needles through the…
a mount to clamp the 3way distribution with blast gate to a 4040 slot10 extrusion. Fits with the hardware of the original spacer plate. Requires 6 additional M8x16 and 6 I type nuts https://www.motedis.nl/en/T-nut-guided-I-type-slot-8-M8…
The small edge on the original can be finicky; I prefer fingerholes to make pulling easier. Assembly is the same as the original lockplates. Sand or deburr the edges for smoother sliding. I also used WD40 Specialist PTFE dry spray lube.…
Small side hook to attach the distributor with a zip tie or a 1/4" screw to your camera. You will need two M3x8 screws to attach it. I printed them in PETG.
58mm Rancilio WDT Coffee Grounds Distribution Tool Found its best to heat up the head of the pin with a lighter and pull it into the body a bit to inset the pin. all the caps are made to glue into place. handle threads into the tallest of…
I designed a simple 12V power distribution box for my new astrophotograpy rig. FEATURES Power IN: 12V, 5.5x2.1 socket plug ("jack") for the power input, e.g. from a battery pack. Power OUT: #5 DC socket plugs, 5.5x2.1 #1 DC RCA female…
You want to put your distribution socket onto your wall? Just drill two holes, put dowels inside and fasten it with two 4mm screws (on each side). I only put this onto a drywall, but I can also imagine it working on concrete or brick…
12V Power Distribution for 3D Printer or other thinks 2x M4 x 25 mm countersunk for electric wire eyelets
Description This bracket allows you to mount your CCU3 directly in the low-voltage compartment of your electrical distribution box without any additional hardware beyond two 3 mm screws. The design is minimalist yet sturdy: Two 3,5 mm…
Clip to mount the https://www.schurter.com/en/part/4747.0000 PDU to a wire basket: With FreeCAD model:
3D Printed 10" Network Rack Mount for Netgear GS305PP and PDU Power Switch As part of my classroom network setup project, I’m building 10" 3D-printed racks for my students. They'll be configuring and testing real-world networks, gaining…
Shelly Gen4 holder for distribution box - can be opened and reused at any time
This a box for distribution board (PCB) of the " Direct Drive Upgrade Kit " for the TronXY X5SA Pro printer.**** I needed this because the gantry holder/gantry plate of the upgrade kit, which holds this PCB originally, cannot be used with…
A simple case for this power distribution PCB I bought off of amazon for my lack enclosure: https://www.amazon.com/dp/B09D3BV22M?ref=ppx_yo2ov_dt_b_fed_asin_title It is designed to use M3 x 4mm x OD 4.6mm heat set inserts to secure the…
I bought a DC distribution board from AliExpress (https://www.aliexpress.com/item/1005007247395450.html) and I wanted to have a case for it instead of having it sit on a shelf “naked”. I don't know how common, or how standard, these…
Evemodel Power Distribution Board Case Just updated Dray's original to add cutouts for ventilation and slide-on cover.
In order to hide bad looking of my circuit breaker box, I've designed 3D shaped cover. PETG is highly recommended. Due to limited size of build plate, I've design the cover as two halves and made front/back as seperated files in order to…
Cover for a VTE Power Distribution Post with a Large Base. Print in suitable filament to be used near electricity.
DE: Diese speziell nachgedruckte Schraube ist eine Replik einer Originalschraube (diese wird nichtmehr hergestellt) aus einer ca. 20 Jahre alten Unterverteilung. Sie wurde von einem befreundeten Handwerker als Muster zur Verfügung…
This mount is for my linked board which is taking 24 volt input and sending it to two regulators which send 5 volts back for distribution to various dome mounted servos and electronics in your R2D2 Astromech.
This is a cup that fits on top of your e61 portafilter. I was having lots of issues getting perfect extractions with my naked portafilter and I saw some videos where baristas were using a small cup to shake up the grinds into the…
Summary This is an electrical distribution box for a boat or leisure yacht for up to seven DC circuits. The box provides a negative and a positive bus bar. The bus bars are positioned on top of each other such that the negative and…
Please leave a ♥ Like if this print was helpful to you :-) This XT60 Distribution Box (or Power Strip) allows you to convert a single power source with XT60 connector into 5 x XT60 outputs. I designed it so the top snaps into the bottom…
This is my try of making a DIY Victron MP2 compatible DC-distribution. It's based of a 40x8mm copper rail which can carry according to DIN EN 61439 1300A. The whole design is inspired by the Victron Lynx but with the requirement of…
I don't recommend rebuilding it if you don't know how. It's life-threatening! It could catch fire! I accept no responsibility for damages or injuries! Print as separate bodies! 4x M3x8 Cylinder Screws 5x Switch (4Pin Black) 1x C13 with…
1u PDU (power distribution unit) wall mount Needed to mount a 1u rack mount PDU to the wall by itself. This part was designed for these drywall screws. This part was designed for these 5mm SS melt-in inserts. This part was designed for…
This project is designed to mount the FYSETC_Distribution_Board to mount to DIN rails. This is useful for StealthChanger builds. Print Instructions: If the mount is inside the printer it is recommended to print in ABS or ASA, otherwise…
Distribution box with cover for WAGO type connections with 3 positions. Suitable for different sections of electrical cables. Can be mounted on the wall or other types of supports thanks to the holes suitable for screws of 4-5 mm in…
================================================================== This model can be printed as is (3 plug slots), or parameterized through Fusion360. Recommended Parameters: Box Depth (Front to Back distance) Quantity of plug slots (This…
========================================================================== There are two versions of this faceplate: a flat version and one that is elevated slightly. Both of their parameters are the same. These models can be printed as…
This simple variation of the classic WDT tools is designed with slightly loose tolerances to ease needle insertion and accommodate epoxy gluing. BOM: 8x 75*0.35mm acupuncture needles. You can buy them in bulk on Aliexpress. Epoxy glue…
Le moteur Puretech a très mauvaise réputation du fait de sa courroie de distribution, qui, sur certains véhicules, se délite au bout de quelques dizaines de milliers de km. Un contrôle de la dite courroie peut se révéler salutaire. La…
I wasn't happy with the available 10-inch rack mount PDU options, so I created my own. Bill of Materials: 4 x M3x6mm Socket Head Cap Screws 4 x M3x5x4 brass heatset inserts 6-way IEC outlet module:…
Power Strip / Power Distribution for XT60 connectors. Multiple models are available. Variations include: 2 through 6 Female XT60 Outputs with 1 XT60 Male Input. Optional Power Switch. Optional Mounting Tabs for all Variations. The model…
A great tool for anyone looking to achieve precise, professional-level coffee preparation! This practical coffee distributor is designed to evenly distribute coffee grounds before tamping. It's perfect for those looking to achieve…
Elevate your coffee game with this Adjustable Coffee Leveling Distributor . Easily set the depth for perfect, even grounds before tamping, ensuring consistent, rich espresso shots. Adjustable Depth: Customize from 5-10mm. Even Grounds…
I can't stand the way the coffee from my grinder always falls on my counter and the wet shot glasses make a mess that I gotta wipe up. This thing aims to fix both. The shot glass portion has risers so if you put a wet shot glass in,…
Mount for CEE EU power split / distribution box / schuko verteiler a simple way to screw and fix the typical 3/4/6 way CEE power splitters
The model builds on the awesome work of the original creator. Between my fat fingers and wanting to use 14ga wire, I increased the front to back size on both models and expanded the tops to match. The 4x version is 100mm and the 6x…
Even though there are lots of WDT tools on Printables here are the reasons I created one myself; I don't want plastic moving parts because friction will inevitably cause micro plastic particles in the espresso I like manual control and…
It's a basic plate for the most generic type of espresso needle distribution tool to protect the needles and hold up the ground coffee stuck to it. There arealso holes for silicone pads on the bottom.
1x3 phase to 6x1 phase converter box. Parts list 1 x Cable gland: M20 or PG16 1 x CEE plug: 230/400V, 3 phase, 16A 6 x CEE plug: Mennekes typ 1350 12 x M5 studs 100mm 24 x M5 washers 24 x M5 spring washers 24 x M5 nuts Wires and cables…
This distribution buss for electronic bench and ham radio use takes 1 fused input from a power supply and sends it out to 5 separate fused circuits. I design the buss bar to be a 3/8 OD copper tube that is inexpensive or even as I had one…
Power distribution box 12V and 5V for astronomy telescope accessories. BOM 2x DC 12V Car Cigarette Lighter Socket Outlet Power 2x 5V 4.2A Dual 2USB Charger Socket Adapter Power 4x GX16 2pin 16mm Aviation Connector 1x DC Power Supply Jack…
Distribution box for Wago terminals. Distributor for two ceiling lamps
Features: Nine needles Accepts varying Needles length Slight outwards draft angle Easy maintenance Easy needle replacement Fast print Beautiful Print instructions My recommendation: • 0.15mm layer height • 30% Grid infill • 3 Perimeters
This model depicts Karl Marx in a deliberately unexpected form — a kneeling, angelic figure holding an envelope. It’s not meant to be a historical representation. It’s a piece of satire built on cultural contrast. 🧠 Concept The idea plays…
Replacement for Hager distribution panel covers - Hager System T (1975) (with more space for modern current breakers) - Hager System 80 SL (1982) There is also a .json file with presets for the .scad file on my github page…
Grinding straight into a portafilter can be messy without a funnel. This one has a built in distribution tool. After grinding, tap the side of the portfilter and spin the funnel in both directions to evenly distribute the ground coffee…
I had a hard time finding this PCB mount since it's not in the default Voron 0.2 .stl files. Adding here to help others. I used this with my Fystec Voron 0.2 kit.
Made it for my brother and uploaded for everyone to use
This is a model of the Duet Tool Distribution Board. The dimensioning is accurate and the parts have been added for looks but the parts are not 100% accurate so don't rely on them. I had to use the diagram of the board on their site for…
Modified Rack Mount for Power Distribution Unit (reversed the socket position to be on the back face
Print with any filament, 0.4mm nozzle, 10%+ infill. In PrusaSlicer, change the print orientation. Use 2x10mm countersink M3 screw and 2 M3 T-nuts to mount the support on 2020 extrusion Use 1x8mm M3 screw on the top left corner to mount…
Klíč 6mm pro otevření rozvaděče panelového domu, vytvořeno v onshape. Recommendation 40% infill, 3 perimeters.
Case for the Anderson Powerpole distribution unit with over voltage and reverse polarity protection. Full details are available at https://github.com/RADARC/Powerpole-distribution Print Settings Printer Brand: Creality Printer: Ender 3…
This is a remix / addon for the https://www.printables.com/de/prints/77243-portafilter-cup-for-shake-distribution made by https://www.printables.com/de/social/96643-hairing. I made this to directly grinde into the “Portafilter Cup” from a…
Mount for 2 x 12 Position Power Distribution Module https://amzn.to/3LH8t61
For use with a delonghi 680/685 portafilter. Fits perfectly to a delonghi 685 and a graef cm 800. Put it on your portafilter, fill it with your coffee grinder, twist it half a turn and you are ready to tamp. Print Settings Printer Brand:…
