1 / 12
Snapmaker 0.5 kg Filament Container — image 1
1 / 12

Snapmaker 0.5 kg Filament Container

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

So, why make a 0.5 kg spool container? Let me tell you. Snapmaker filament has clear spools, so you can look in them…

Rating
0 / 5
Likes
0
Downloads
19
Makes
0
Views
279
Reviews
0

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial — Share Alike

So,why make a 0.5 kg spool container? Let me tell you. Snapmaker filament has clear spools, so you can look in them and find what you need without opening all the drawers. That's why I designed these. Also they hold much more,take up less room, and use less filament to create than other snapmaker specific parts holders I saw.

With today being the Snapmaker 2 release, I thought I would give it to the community.

If you arenot printing on the original Snapmaker you may be able to do both sides in one go. Use the Left/Right stl's (no top/bottom in name). If youare printing on the original Snapmaker you will need to use the Left/Right and Top/Bottom prints, so 4 stl's._

If you like this design and use it and enjoy it's use, please consider coming back and giving a tip! I am a creator, so I like to know my time designing for Thingiverse and makers is well spent and could use the dollars. Or check out my Etsy! HutchisonCurioStudio.etsy.com

Print Settings

Printer:

Snapmaker

Rafts: 

Yes

Supports:

Yes

Resolution: 

.2

Infill:

75%-100%

Filament:

Any PLA

Any


 

Notes:

 

I use a brim, not a raft, but that isn't an option in the pull-down.

You will be putting rotational force near where the infill is, so don't go easy on the infill. I have provided an image of my placement and settings in Snapmakerjs that I would recommend. Specifically, I would reocmmend printing it flat like this with supports, but do your thing!

I had a nub break once. I glued in back and it's been fine ever since.

Post-Printing

Clean-up

Carefully use an exacto knife and perforate the raft around the nub. Use a flat blade and work it in between the print and the raft.

 

 

Category: 3D Printer Accessories

Tags