Magnetically indexed Brio compatible multiway turntable
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Based on some excellent existing turntables, I made it use 6mm diameter x 2.7mm tall magnets to index the turntable.
- Rating
- 5 / 5
- Likes
- 67
- Downloads
- 359
- Makes
- 4
- Views
- 1,805
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution
Uses 6mm diameter by 2.7mm tall magnets. The fit of the magnets is tight, but put a tiny bit of super glue in there to make sure they don't come out.
It is important to orient the magnets correctly when inserting them. I put all the magnest in a stack, and pushed one into the top. Then with the stack holding the orientation, I pushed each one into the bottom. This guarantees no orientation issues.
Bottom takes 8 magnets, top needs 1.
No supports needed. Printed at 0.2mm layer height, 15% infill, 3 walls/top/bottoms.
See how nicely each position snaps in place:
https://www.youtube.com/shorts/aaWkCkB9O1c