Magnetically indexed Brio compatible multiway turntable
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Based on some excellent existing turntables, I made it use 6mm diameter x 2.7mm tall magnets to index the turntable.
- Ocena
- 5 / 5
- Polubienia
- 67
- Pobrania
- 359
- Wydruki
- 4
- Wyświetlenia
- 1805
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution
Uses 6mm diameter by 2.7mm tall magnets. The fit of the magnets is tight, but put a tiny bit of super glue in there to make sure they don't come out.
It is important to orient the magnets correctly when inserting them. I put all the magnest in a stack, and pushed one into the top. Then with the stack holding the orientation, I pushed each one into the bottom. This guarantees no orientation issues.
Bottom takes 8 magnets, top needs 1.
No supports needed. Printed at 0.2mm layer height, 15% infill, 3 walls/top/bottoms.
See how nicely each position snaps in place:
https://www.youtube.com/shorts/aaWkCkB9O1c