1 / 7
Artillery Sidewinder extruder tensioning knob
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement extruder tensioning knob for Artillery Sidewinder/Genius. It allows the use of a proper M4 screw.
- Rating
- 5 / 5
- Likes
- 14
- Downloads
- 61
- Makes
- 0
- Views
- 693
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
The model is self-supported if printed in the orientation shown in the photos. After printing, drill the inner hole with a 3.5mm drill bit, then tap the hole with an m4 tapping tool. After that, remove the support and add an M4x16 hex screw and glue the knob to its place.
I printed it out of PLA but should work out of PETG as well. With SuperSlicer, I had to turn the “No perimeters on bridge areas” to “Keep only bridges” to get the correct bridging.