Counting matching models…
A structure that uses opposing tensioned strings to remain stable. A neat toy/display stand/demonstration piece/conversation starter that is a kind of optical illusion. UPDATE: I have changed the model's version to 2.0. I made some simple…
🧰 Overview SV08 Gantry v2 brings a cleaner, more precise CoreXY experience: Front-access belt tensioning for the AB motors (Voron-style) Aligned pulleys at the XY joints for parallel belt paths Easier setup & maintenance with more travel…
This is a remix of the MMU2 thumbscrews for the MMU2 S . The longer thumbscrew should avoid accidentially pushing buttons on the MMU2S. If you already printed the short/original, you just have to replace the left thumbscrew, because there…
My MMU is in a pretty tight location and I can't easily get an allen key in there to adjust the idler tension. Here is a design for some thumbscrews that can be pushed onto 40mm M3 screws to adjust the tension without an allen key. They…
I did this remix to avoid the use of screws and nuts, except for the tension M3 screws. Small adjustments here and there: various rounding, sacrificial bridges on the top table, modified thread paths to facilitate tensioning. The shuttles…
Gravity Assisted Tensioning System (GATS) A streamlined method for precise belt tensioning on the RatRig V-Core 4 and V-Core 3.1 (with front tensioner upgrades). Overview: The GATS simplifies belt tensioning using hanging weights to apply…
"Tight" can be all over the place depending on who's doing the tightening. I made this tool to help you get your 2mm belts close and consistent. I am using it on a Prusa mk3, but it will work with other printers if using the same type and…
A multi functional tensioner and spool comprised of a single unit in the shape of a bone. A total of 8 holes (5mm dia), 3 slots (15mm length) and 2 notches (half length open ended slots), are strategically placed to enable a number of…
Heyho :) Here is part 3/3 of my DIY projector screen project. A practical fastener for the screen (or other thinner objects). It works quite simply and is very strong. Function Installation: Simply place the two parts under and over the…
later update: 3 November 2024 The XY Belt Tightening Standard version bottom right.stl was missing a heat set insert for the camera and we have added also a camera holder. You just need to remove the camera from the original holder and…
150 mm in length to properly space the idler pulleys when checking belt tension.
I encountered difficulty attaching the original design due to the fastener being positioned beneath the tensioning rod. The use of hex wrenches with a ball end could facilitate this process, but my current set only has flat ends. The…
Creality single-gear extruders, especially the metal ones, come with a very stiff spring and sometimes can, even on their minimum design (screw all the way loose) and true minimum (cap removed) settings, badly deform softer filament,…
This block helps to ensure that, while tensioning the voron legacy xy belts, the gantry remains square to the frame. You just need to push the gantry to the front idlers and then lock the blocks behind it The hardware required are n°4…
The tensioning shim snaps on/off and is retained when the mag holder is empty. Without modification, mags can be held in place if sayas are assembled tightly enough. Advise cutting an additional groove in smaller mags to match the…
I wanted the belt tensioning to be separate from the connection of the rails. Main purpose was to not have the alignment and position of the rails be tied to the belt tension. This way you can tighten the belts without messing up your…
The Tensioning Buckle - Wind Rope Fast Knot is used in outdoor activities like camping, mountaineering, or sailing to quickly adjust and secure ropes without complex knots. Here’s how it functions: Inserting the rope : The ends of the…
After printing the parts for a floating tensegrity table (see the remix source) and assembling the hardware, I realized that I wasn't looking forward to trying to thread this and get the right estimated lengths before tensioning. So, I…
IMPORTANT! YOU NEED 4 STANDARD M3 NUTS AND 4pcs of M3x12 BOLTS IN ORDER TO COMPLETE THE ASSEMBLY! Compatible with Ultimaker 2, Ultimaker 2+ and possibly more. Tensioning Animation Tutorial: PROS AND CONS ORIGINAL DESIGN TENSIONER DESIGN…
A gridfinity holder for the NTE zip tie tension tool from Microcenter. Part #: 04-TG2 Link to Item: https://www.microcenter.com/product/667650/nte-electronics-cable-tie-tension-tool-with-automatic-cut-off
A simple little belt tensioner. This uses a zip tie for tensioning, and has no sharp edges that the belt can abrade against. Just print your preferred size (file name says how much the tensioner can tighten each belt. Slip the main part…
A cleat I made to wrap the lines for my tarp, to make it fast to deploy and pack. It doubles as a tension device. To use it to tension the rope just pull the line through the big hole and around the ear, like pictured. Use the same method…
The model is self-supported if printed in the orientation shown in the photos. After printing, drill the inner hole with a 3.5mm drill bit, then tap the hole with an m4 tapping tool. After that, remove the support and add an M4x16 hex…
EN: Cable tie tensioning aid Auxiliary tool for tensioning/tightening cable ties in places that are difficult to access with fingers or coarser tools It frequently happens that you have to attach and tighten a cable tie in a place where…
I was looking for an easy to print box to storage my tool that could be built without the need of external parts or assembly. This print in place box is great. If you wan't, can add the insert inside the box before printing, and print all…
The Gridfinity bug is running rampant in my shop, and this is just another bin to help me organize my tools. It fits the BTT/BigTreeTech Belter (non-affiliate link) belt tensioning tool with added prints needed to operate with a single…
Monolith Belt Path Pretensioner Tool A dedicated pretensioning jig for attaching belts to the toolhead on Monolith-style belt paths. Achieving consistent, high pretension during belt attachment is notoriously tricky — this tool takes the…
This is a belt tensioner for the Shapeoko 3. Simply turn a screw to tension the belts to your liking. It requires a slot to be made in the plates for the belt to exit. The tensioner can be used as a template to mark the location for the…
Added a handle to Danissl's tensioning tool for ease of use. Prints with the flat part of the handle on the bed. No supports needed. I printed these with 5 walls 25% infill but thats complete overkill.
you can connect the knomi on any usb port from the motherboard just use the 5v and ground also the uart port can be used here is the motherboard diagram Later Edit 28. November 2024 modified the Knob and the Knomi holder. made them a…
This model is inspired by the excellent GATS system, https://www.printables.com/model/1165578-gravity-assisted-tensioning-system-gats-for-v-core. I wanted a system that would tension all the four belts at the same time, and also add a few…
I decided I wanted to retain the factory belt tension system on my Ender 3 Pro so I made this little tool to help in getting it as tight as possible since there's not a terribly good way to tighten it once you've assembled your printer.
A platform for those that have trouble keeping their fingers on Z-bars while tensioning. Can be used with both top and bottom of keyway. Modeled specifically on the TOOOL and Covert Instruments 0.030", 0.040", and 0.050" Z-bars but might…
I've been using belt tensioners for both X & Y axis's puller design by fessyFOO rather happily for some time now. I didn't particularly care for fessyFOO's nut design as it's so small and difficult for me to grip, so I was using yac's “A…
v2 out now! Click here to acces the page. IMPORTANT! YOU NEED 4 STANDARD M3 NUTS AND 4pcs of M3x12 BOLTS IN ORDER TO COMPLETE THE ASSEMBLY! Compatible with Ultimaker 2, Ultimaker 2+ and possibly more. Tensioning Animation Tutorial: PROS…
Revision Log 2026-02-09 -- Initial Release 2026-02-10 -- Added vertical ribs for stiffness. BOM: Qty 6 - M3 Brass Inserts Qty 12 - M3 x 8 Flat Head Cap Screws 4 to attach each motor to the carriage. 2 to attach each retainer to the base.…
Later Edit 28. November 2024 modified the Knob and the Knomi holder. made them a little bit smaller in some cases the bed was heating them This mod integrates the BigTreeTech Knomi V2 Display into the Y-axis belt tensioning system of the…
Did your On Stage MS7700B Tripod Microphone Stand tensioning ring shatter into a thousand pieces? Fret no more, print this piece in TPU, and you will have a piece that will allow you to adjust the height of your mic stand and also last…
This was a quick remix I did of the original port cover. I added a bit of spring tension to retain the cover in the port better and a removal tab to aid taking the cover off of the port.
In the kindergarten of my youngest (5) the kids love to work in the workshop where they can use all kinds of tools like drills, hammers or saws. The blades of the fretsaw obviously don't last long, and exchanging is challenging for the…
Modded stepper mounts to fit W-Jack between the motor and the frame so you can tension the belts a little. You unscrew the motor a little and then use the screw on the side of the motor mount to tighten the W-Jack which moves the motor…
The M8 screw that is installed in the old bandsaws is really flimsy and wears out quickly, this replaces it. You need a long enough M8 screw and can then just slide this on to turn it. I recommend putting a washer underneath it. Works…
The bearing housing on the motor cultivator for the drive belt. Print from nylon glass-filled or carbon-filled ABS.
Use this to tension your Z-axis by clipping it onto the aluminum frame and push the belt. Helps the belt grip and remain precise. See original model for examples. (Use Remix Instead) Unfortunately, this model didn't work out as I hoped.…
🇩🇪 Mit dieser praktischen Abspannhülse kannst du GFK-Masten oder Stativ-Masten ganz einfach und sicher abspannen. Die Hülse wird einfach über die Spitze des Mastes geschoben und bei einem Rohrdurchmesser von 25 mm festgeklemmt. Die acht…
Tension lever for the Bauer corded bandsaw. Printed using eSun PLA+, 5 walls.
A further refinement/version of the previous QD Ergo Stock + ZAX TPU buttplate Lynx 2.1 remix I made, now with a toolless tensioning wheel. Copies the idea from several existing Lynx buttplate remixes, but isn't actually based on any of…
This thing was made with Tinkercad. Edit it online https://tinkercad.com/things/3cdQ294cnmj Modified version of stabilizer made by Adoniram Instructions I started with Adoniram's Y axis stabilizer I used his bearing holders then made up a…
My new banjo uses 7mm nuts to tension the head and I didn't have and couldn't find a deep enough 7mm socket to replace/adjust it so I made this instead. I attached both OrcaSlicer and Bambu Studio project files with pre-configured print…
The new handle was designed to be more ergonical in terms of girp. This version was fixed with a insert - and a a split but can be used in principle for a rount shaft with a diameter of 13 mm / can be enlarged by mechanical reworking if…
Gridfinity Collett Tensioning Knob and Touch Probe Storage / Holder Simple gridfinity storage holder for Ooznest WorkBee Z1+ Touch Probe, Tensioning Knob and two Collets (¼" & 1/8"). Thanks I really hope you like this model, please like ,…
🔧 Custom 3D printed spring tensioning handle designed for ABB circuit breakers. Built for strength, durability, and a comfortable grip during maintenance operations. ⚡ Perfect for replacing worn or damaged original handles while keeping…
Got one of those cheap and cheerful disk detainer lock picks from China and kept being annoyed that they just used M5 screws as the tensioning lever/bar. Then today suddenly remembered that I can just throw my favourite golden hammer at…
🦵 What is this? A 3D-printed simulator that reproduces the graft tensioning and fixation step of anterior cruciate ligament (ACL) reconstruction. A simulated graft (15 mm wide bovine leather strip) passes through the femoral and tibial…
Tensioning Slider for Qidi Q2 with a reinforced base.
I've been using belt tensioners for both X & Y axis's puller design by fessyFOO rather happily for some time now. I didn't particularly care for fessyFOO's nut design as it's so small and difficult for me to grip, so I was using yac's “A…
you can connect the knomi on any usb port from the motherboard just use the 5v and ground also the uart port can be used here is the motherboard diagram Later Edit 28. November 2024 modified the Knob and the Knomi holder. made them a…
Use this to tension your Z-axis by clipping it onto the aluminum frame and push the belt. Helps the belt grip and remain precise. See original model for examples. (Use Remix Instead) Unfortunately, this model didn't work out as I hoped.…
A further refinement/version of the previous QD Ergo Stock + ZAX TPU buttplate Lynx 2.1 remix I made, now with a toolless tensioning wheel. Copies the idea from several existing Lynx buttplate remixes, but isn't actually based on any of…
Monolith Belt Path Pretensioner Tool A dedicated pretensioning jig for attaching belts to the toolhead on Monolith-style belt paths. Achieving consistent, high pretension during belt attachment is notoriously tricky — this tool takes the…
Got one of those cheap and cheerful disk detainer lock picks from China and kept being annoyed that they just used M5 screws as the tensioning lever/bar. Then today suddenly remembered that I can just throw my favourite golden hammer at…
Added a handle to Danissl's tensioning tool for ease of use. Prints with the flat part of the handle on the bed. No supports needed. I printed these with 5 walls 25% infill but thats complete overkill.
The Tensioning Buckle - Wind Rope Fast Knot is used in outdoor activities like camping, mountaineering, or sailing to quickly adjust and secure ropes without complex knots. Here’s how it functions: Inserting the rope : The ends of the…
Later Edit 28. November 2024 thanks to our member SparksOnTap88 we have modified the Knob and the Knomi holder. made them a little bit smaller in some cases the bed was heating them This mod integrates the BigTreeTech Knomi V2 Display…
This part is mounted on the corners of the tent and provides tension for the poles, allowing them to be secured with ground stakes.
Clamp mount for tensioning tube for folding box light from Hinterher . I used two to mount them vertically behind the Hxxxl light trailer which is hanging on the wall with two wall mounts .
this is a remix if your the og feel free to say hi so i can tag you. adapted for 2020 frame. it fits very tight. petg pref 30+ infill This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/aIXJdmBdSKU feel free…
![[v2] Ultimaker 2/2+ Sliding Block with Belt Tensioning Mechanism](https://media.printables.com/media/prints/1211117/images/9091686_71d278c2-a44d-47b7-b96a-af3d0ae07ffd_c4078ca3-a5b8-4c4b-8948-2a52f73f01fa/sliding_block_6mm_offset_v8_2025-feb-28_05-27-16pm-000_customizedview38322024348_png.png)
