Fridge Door Pivot Block
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple pivot block for fridges with a split door seal. This specific model has screw posts that are 57.75mm apart.
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 42
- Makes
- 1
- Views
- 782
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- GNU General Public License v2.0
First prototype and it worked for my fridge very well (not making a follow-up). I printed this at 15% infill, 0.25mm layer height, 2.0 shells, 80 mm/s infill speed (my fastest mode).
It isn't tapered on the bottom to fit flush against the top of my fridge but honestly it doesn't affect the performance on my door and tends to work BETTER, simply because my old pivot block wasn't low enough to catch the door mechanism. Basically, you'll likely need to change the screws and thickness for your fridge depending on the model.
Confirmed Working Fridge Models:
- Jenn-Air Rise 36" French Door (Whirlpool manufactured)
- Whirlpool WRF535SMHZ02