1 / 1
Decora Wallplate Blank Insert
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a blank Decora wallplate insert, to cover an empty hole after you remove a device like a switch or plug.
- Rating
- 5 / 5
- Likes
- 50
- Downloads
- 715
- Makes
- 8
- Views
- 2,216
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a blank Decora wallplate insert, to cover an empty hole after you remove a device like a switch or plug.
Design notes:
- The depth of the front part of the insert should bring it into near-flush alignment with your faceplate. I've tested it with Lutron Claro and Legrand hidden-screw plates.
- The top and bottom holes are threaded for a 6-32 machine screw.
Printing tips:
- Print as-oriented in the .stl file, the larger part down.
Other notes:
- If you'd like any adjustments (e.g., thickness of the front or back parts, etc.), just message me. I used OpenSCAD to design it, and it's fully parameterized for easy changes.