BambuStudio - Temperature Tower (ABS/ASA)

Temperature tower for ABS/ASA filaments going from 230 - 270 degrees celsius.

The machine code is added to the printer profile with a suffix of TempChange. 

If you'd like to modify the text, you can add a new text shape with a font of Arial.

Temp Tower Positions are all at -14x -4.7y with a Z ranging from -40 to 40.

Size of text should be 12.75mm long by 1mm deep

You'd need to change the Layer change G-Code section in Printer as well to whatever temperatures you used:

;BEFORE_LAYER_CHANGE
G92 E0.0
;[layer_z]
{if layer_z>=1.05} M104 S250 M109 S230 {endif}
{if layer_z>=11.05} M104 S255 M109 S235 {endif}
{if layer_z>=21.05} M104 S260 M109 S240 {endif}
{if layer_z>=31.05} M104 S265 M109 S245 {endif}
{if layer_z>=41.05} M104 S270 M109 S250 {endif}
{if layer_z>=51.05} M104 S275 M109 S255 {endif}
{if layer_z>=61.05} M104 S280 M109 S260 {endif}
{if layer_z>=71.05} M104 S285 M109 S265 {endif}
{if layer_z>=81.05} M104 S290 M109 S270 {endif}