Tevo Tarantula Bed Support for MGN12 linear rail
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Changed RobFlip`s https://www.thingiverse.com/thing:2572598 to use with my MGN12.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 67
- Makes
- 0
- Views
- 704
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Changed RobFlip`s https://www.thingiverse.com/thing:2572598 to use with my MGN12.
But still can be used with stock wheels.
Had to move inner walls, for holes went right through them
Wings need no changes.
Print instructions
Print Settings
Printer: Tevo Tarantula
Rafts: No
Supports: No
Resolution: .2mm
Infill: 15% or more
Notes:
RobFlip recommend printing these parts with ABS with 5 top / bottom and min of 5 walls. You will need 8 M4 bolts and nuts to assemble.
Better not to make more than 40-50% infill, or you will have heavier carriage. It will decrease printing quality