Twist Connector for DN50 Hose
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I am using DN50 hoses/pipes in my workshop to get dust from one point to another. After going through a number of…
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 26
- Makes
- 0
- Views
- 303
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
I am using DN50 hoses/pipes in my workshop to get dust from one point to another. After going through a number of systems, I designed this bayonet-style connector. The goal was to make something that I could easily connect and disconnect, preferrably with one hand if one of the two parts was held in place somehow. Thus far it works!
Important: To save on filament, I designed these for a piece of DN50 plastic pipe to be glued into them, either as a connector to that pipe or as a piece to attach a hose to. I had enough pupe laying around for that, but it also makes that end of the connector a lot more sturdy compared to a 3d printed pipe piece.
Print the outside part with supports.