Apple Mac Mini 140mm Cooling Fan or SSD Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed around the 2018 intel Mac mini that runs loud, I remove the black plastic bottom it just pops right off the…
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 220
- Makes
- 0
- Views
- 2,289
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
Designed around the 2018 intel Mac mini that runs loud, I remove the black plastic bottom it just pops right off the 5v Noctua fan flows air through the mac keeping it cool and quiet.
I have made 3 versions with different position and size pass through holes, and 2 base stands one that sits inboard about 10mm and one that matches the upper part.
I have also provided a SSD adapter to go in place of a fan, the M1 Mac Minis dont really need extra cooling so could be a nice stand and ssd holder for the M1 as well.
Print Settings
Printer Brand:
Anycubic
Printer:
Large Size Chiron
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
I used 3 step progressive cubic at 25%
Filament: any I used Silk PLA any
Notes:
You can print it with no supports just flip the base face down in the slicer, the cable pocket will print without support I turned on Bridge mode in Cura.
When buying a fan and USB fan adapter make sure to get a 5v fan Noctua are the best you can buy.Category: Electronics