Apple Mac Mini 140mm Cooling Fan or SSD Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed around the 2018 intel Mac mini that runs loud, I remove the black plastic bottom it just pops right off the…
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 220
- Wydruki
- 0
- Wyświetlenia
- 2286
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
Designed around the 2018 intel Mac mini that runs loud, I remove the black plastic bottom it just pops right off the 5v Noctua fan flows air through the mac keeping it cool and quiet.
I have made 3 versions with different position and size pass through holes, and 2 base stands one that sits inboard about 10mm and one that matches the upper part.
I have also provided a SSD adapter to go in place of a fan, the M1 Mac Minis dont really need extra cooling so could be a nice stand and ssd holder for the M1 as well.
Print Settings
Printer Brand:
Anycubic
Printer:
Large Size Chiron
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
I used 3 step progressive cubic at 25%
Filament: any I used Silk PLA any
Notes:
You can print it with no supports just flip the base face down in the slicer, the cable pocket will print without support I turned on Bridge mode in Cura.
When buying a fan and USB fan adapter make sure to get a 5v fan Noctua are the best you can buy.Category: Electronics