1 / 9
Extech EX330 Multimeter & Lead Wall Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wall mount for Extech EX330 Multimeter. Attach to wall or shelf with flat head screws. Holder for leads is optional.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 60
- Makes
- 0
- Views
- 433
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Wall mount for Extech EX330 Multimeter. Attach to wall or shelf with flat head screws. Holder for leads is optional.
Print Settings
Printer:
Sindoh 3Dwox
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
Layer Height 0.2mm
Infill:
20%
Notes
- Nozzle and Extrusion width = 0.4mm
- Top & Bottom Layers = 3
- Multimeter Holder Wall Thickness = 2.4mm
- Optional Lead Holder Wall Thickness = 1.6mm
- PLA and ABS tested
Print in orientation as shown in photos. I used a raft but did NOT use any supports with slight quality challenges at the top of the knockout circles but nothing real bad.
Category: Tool Holders & Boxes