1 / 4
Artillery Sidewinder X2 - Top Gantry Width FIX - WIP
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Artillery Sidewinder X2 - Top Gantry Width FIX
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 45
- Makes
- 0
- Views
- 1,756
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
The main problem I had with my Sidewinder X2 was that the top width of the gantry was 1.5 mm smaller than the bottom width. This means that when I set the correct tension for the Z-axis wheels at the bottom, at the top, the tension was too low and caused play.
So to correct this issue, I designed this new top gantry.
Note :
The spool holder was designed to fit an old Vertex k8400 spool holder.
Parts needed :
- 4x Carbon fiber tubes 12x400 mm (must be cut to the right length)
- Printed parts
- A bunch of M3 screws and bolts.