1 / 3
IKEA Skadis Ivar Mount — image 1
1 / 3

IKEA Skadis Ivar Mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

These are hooks which you can use to mount a 36x56cm IKEA Skadis pegboard onto the side of a 50cm deep IKEA Ivar system

Rating
4.833 / 5
Likes
146
Downloads
433
Makes
8
Views
4,778
Reviews
6

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution — Noncommercial — Share Alike

These are hooks which you can use to mount a 36x56cm IKEA Skadis pegboard onto a 50cm deep IKEA Ivar system without having to use screws or modify your Ivar system in any way!

Note that these were specifically designed for a 50x179cm IVAR system. When looking at pictures of the other heights it seems like the distance between the crossbeams differs, so I'm not sure if these hooks will work. Chances are they work just as well but with a little bit more slack between the bottom hooks & the crossbeams if you just plug the hooks into different holes of the pegboard.

Printed the hooks both with a .4 and .6mm nozzle, with a layer height of respectively 0.2 and 0.3mm. Both worked great!

Tags