Adapter for Roller Shutter Motor EVEROXX ERM 20/15 Ø45mm für 60mm DriveShaft
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Needed to replace my bad rolling shutter motor. Didn't want to replace by original part as this was too expensive for…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 21
- Makes
- 0
- Views
- 383
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
Needed to replace my bad rolling shutter motor. Didn't want to replace by original part as this was too expensive for me and not durable. So I bought something rigid and tough and inexpensive with manual adjustable limit switches. Electronic of my previous High-Tech shutters failed (2 out of 8!).
During repair works I figured out that the org. adapter was too short, so I designed this and am happy with it.
The driveshaft is an octoagonal shaft (8-Kant-Welle Ø60mm). For axial fixation I drilles two Ø4mm holes into the shaft (180° opposite sides). Measured the necessary distance when all bearing points are met. Then drilles a Ø4mm hole through the PETG (Be carefull and do not damage the motor by drilling too deep!), inserted a heat inset and fixed the shaft on two places with an M3 countersink screwhat screw. Works fine!
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3 MMU 2
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.20mm
Infill:
25%, 4-5 perimeters@4mm nozzle
Filament: Sunlu PETG Black
Notes:
hole for heat inset drilled later. Enough skin in the game! Haha.
Category: Household