Magnetic razor holder (no supports) v1
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Magnetic holder for generic cartridge razor handles. No supports needed.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 52
- Makes
- 0
- Views
- 265
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
No supports needed. Draft recommended.
Razor holder that attaches to a metal surface (e.g. bathroom cabinet).
The model includes places for four 6x3mm magnets. The printing should be paused one layer before the magnet hole is covered (the first layer that covers the hole).
The holder can be printed without magnets. In this case, you can, for example, use double-sided tape to attach it.
How to insert a pause in PrusaSlicer: https://help.prusa3d.com/ja/article/insert-pause-or-custom-g-code-at-layer_120490
Warning! Be careful when placing the magnets during printing! The magnets might attach to the hot build plate. Also, if your nozzle/hotend is made of magnetic material (e.g. hardened steel nozzle), I would recommend using hot glue or tape to secure the magnets in place.