1 / 3
Umbilical Mod For Voron With CANBus Board
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Umbilical Mod For Voron With CANBus Board
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 54
- Makes
- 0
- Views
- 2,650
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
This is just simple umbilical mod designed for CAN Bus tool head board.
I have planned to run wires from electronics chamber to exhaust fan grill via inside of the rear right frame. Strain relief is placed on the grill and from there umbilical goes to the toolhead.
BOM:
| Material | Quantity |
| M3x5x4 Theraded Insert | 2 |
| M3x8 Socket Head Screw | 3 |
| M3x6 Button Head Screw | 2 |
| M3 Nut | 2 |
| M2x10 Selft TappingScrew | 2 |