TP-Link POE Wall Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This wall mount is meant for the TP-Link TL-POE150S Injector, used for powering on a device with Power Over Ethernet…
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 70
- Makes
- 2
- Views
- 576
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
This wall mount is meant for the TP-Link TL-POE150S Injector, used for powering on a device with Power Over Ethernet while not having a compatible network plug available.
For testing purpose I printed this on a layer height of .3mm, however the result will be much better when printed with .10mm or .20mm layer height.
You can see the type of screw I have created the design for. It's a 3mm screw with a head with a diameter of 5.75mm (length does not matter ;-) ).
Print instructions
Printed on the MK3S, no rafts or supports needed. Preferable a layer height of either .2 or .1 and 15% infill.