1 / 4
Monitor stand with Honeycomb pattern and two shelves for storage
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I made this Monitor stand based on other designs I found here on printables. The honeycomb is created in the slicer.
- Rating
- 5 / 5
- Likes
- 58
- Downloads
- 235
- Makes
- 1
- Views
- 1,861
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
This monitor stand requires no screws or glue if your plywood (or other material for the shelves) fits well. Dimensions are 200mm wide x 140mm high x 20mm extrusion depth.
In the slicer, you can customise to your liking, but these were my settings:
- PLA
- 6 perimeters for strength
- Infill 7% Honeycomb (fill angle 0°)
- 0 layers top and 0 layers bottom (to expose the infill pattern)
- to add with plate adhesion, you may want to add a brim
I found if you play with the infill settings, you can get some other nice patterns out of it.