Ender 5 X Stepper Cover with Wire Anchors
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a simple replacement for the Ender 5's X stepper cover using stock screws. It adds two spots for zip ties to…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 23
- Makes
- 0
- Views
- 214
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
This is a simple replacement for the Ender 5's X stepper cover using stock screws. It adds two spots for zip ties to aid cable management. This also prevents the wire harness from snagging on the outside of the X axis during long prints (as it is prone to sagging from heating).
This is a particularly handy mod for printers on direct drive where the Bowden tube no longer provides support to the wire harness. I use wire wrap with a length of PTFE tube running with the wires for added rigidity.
Installation
- Remove the X stepper cover sticker.
- Unscrew three of the screws.
- Use one hand to hold the X stepper in place while you remove the fourth screw.
- Position the new cover and insert one screw just enough to grab the stepper.
- Partly thread in a second screw on the opposite side of the stepper.
- Let go of the stepper and finish inserting and tightening the four screws.
Category: 3D Printer Parts