1 / 7
ATX PSU Adapter for EliteDesk and Prodesk SFF — image 1
1 / 7

ATX PSU Adapter for EliteDesk and Prodesk SFF

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is an adapter to mount an HP SFF Power supply in an ATX Computer case for easy case swap.

Rating
5 / 5
Likes
25
Downloads
261
Makes
1
Views
1,965
Reviews
1

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution

This is an adapter to mount an HP SFF Power supply in an ATX Computer case for easy case swap.

Fits most HP SFF power supplies, I believe. Main dimensions of the Power supply this bracket is designed for are 95x73mm (length doesn't matter) so you can check yours before you print. I THINK this adapter will fit all EliteDesks and ProDesks, 400/600/800, G1-G5 and 240/310W, but I might be wrong.

Screw holes are designed at Ø2,2mm and should fit typical PSU mounting screws (#6-32 UNC) and you will need a minimum of 7.

Since the cables on this power supply are very short, it makes a difference where the cables exit the power supply in order to reach the motherboard. Therefore, the bracket was designed so the PSU position gets the cables as close as possible to the motherboard, given that the PSU is mounted in the bottom of your case. It should be possible to rotate the bracket 180 degrees in case you have a top mounted PSU.

Tags