1 / 2
Aquarium Decor - Airstone Retainer
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a retainer for 0.8" round aquarium airstones similar to those that are included with the popular HITOP dual…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 41
- Makes
- 0
- Views
- 410
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Attribution
This is a retainer for 0.8" round aquarium airstones similar to those that are included with the popular HITOP dual outlet air pump.
It includes a small platform for mounting other decorations.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
200
Infill:
100
Filament: Hatchbox PLA Black
Notes:
- IMPORTANT: Print these parts at 100% infill. Less infill may cause air to be trapped inside the part and will result in the part floating in the tank.
- Seal with a coat of Krylon All-In-One Flat Clear Paint. Allow the paint to cure for at least 24 hours.
- Insert the airstone from the bottom side of the airstone retainer. The inlet barb should exit through the top hole of the airstone retainer.
- Connect the hose to the airstone inlet barb.
- OPTIONAL: If utilizing the clip, you can adhere it to the bottom of the aquarium using hot glue or other semi-permanent aquarium safe adhesive.
- Place the airstone retainer in the aquarium.
Post-Printing
Category: Pets