1 / 2
1/4-20 Bolt Knob
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a press fit knob to cover the head of 1/4-20 bolt. It can be used on various tools as well camera equipment.
- Rating
- 5 / 5
- Likes
- 30
- Downloads
- 397
- Makes
- 3
- Views
- 1,219
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
This is a press fit knob to cover the head of 1/4-20 bolt. It can be used on various tools as well camera equipment.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
200
Infill:
40
Filament: Hatchbox PLA True Red
Notes:
This was printed on a Creality CR-6 SE with 4 walls and 40% infill.
The nozzle temperature was set to 200C and the bed was heated to 65C.Post-Printing
- Place the 1/4"-20 bolt through the main knob housing.
- Use a C-clamp to assist with pressing it in place if necessary.
- Press the vanity cap into the knob. This is designed to hold without adhesive, however if your printer has a wider tolerance you can secure it with super glue.
Category: Parts