Modified Servo Wiper Arm (REMIX) for Enclosed VCORE3
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a remix of LumberjackEngineering's servo deployed Nozzle wiper.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 24
- Makes
- 0
- Views
- 356
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
This is a remix of LumberjackEngineering's servo deployed Nozzle wiper. With an enclosure on the vcore3 I couldn't fit the servo deployed nozzle wiper for 3030 extrusion anywhere without having interference with the bed, extruder assembly or x axis even with stowed. So I modified the wiper arm and added a double bend to raise the brush up 40mm. This allowed me to mount the rest of the assembly lower and provide the clearance necessary on my printer. I mounted mine on the left rear vertical 3030 (below and left of the y axis end stop) below the corner bracket (about 8mm between the bottom of the bracket and top of the designed mount).
Print Settings
Printer:
Ratrig VCORE3 500
Rafts:
No
Supports:
Yes
Resolution:
.2
Infill:
35%
Filament:
Any ABS, ASA
Any
Notes:
I print this on it's side and chop off a small portion of the round servo attachment by placing it below the bed so the rest of the part is flat on the bed surface. I add supports for the cylinder and the brush holder opening.
Category: 3D Printing