1 / 5
Dynam ME262 Cockpit Frame with FPV Pan and Tilt mount — image 1
1 / 5

Dynam ME262 Cockpit Frame with FPV Pan and Tilt mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a cockpit frame I developed for Dynam's ME262 twin 70mm edf jet. I wanted an FPV experience to simulate…

Rating
0 / 5
Likes
4
Downloads
40
Makes
0
Views
826
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

This is a cockpit frame I developed for Dynam's ME262 twin 70mm edf jet. I wanted an FPV experience to simulate sitting in the cockpit. But the canopy that comes with the kit is just painted clear plastic and trying to look through that would create terrible picture quality for FPV. So this frame is an open air canopy, but with all the structure the pilot would have to look around in real life, creating a more true to life experience for the FPV'er

I also designed a mount that allows a standard wood pan and tilt assembly (from readymaderc) to be used. Simply hog out the foam as required from the Dynam center cockpit piece and glue the mount into place. The pan and tilt assembly screws into the printed mount.

Print Settings

Printer Brand:

MakerBot

Printer:

MakerBot Replicator 2

Rafts:

Yes

Supports:

Yes

Resolution:

.2mm or better

Infill:

50%

Filament: Esun ABS Gray


Notes:

The canopy frame is an exceptionally difficult print. I suggest supporting the entire perimeter (on a raft) along with the frame of the front window. And at least the top 1/3rd of all the side uprights and overhead which requires full support as well. Good luck!

Category: R/C Vehicles

Tags