Compact Tripod
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Inspired by Kernel770's tripod I re-designed it from scratch.
- Rating
- 4.333 / 5
- Likes
- 168
- Downloads
- 611
- Makes
- 8
- Views
- 4,998
- Reviews
- 9
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Inspired by Kernel770's tripod I re-designed it from scratch. :)
The camPad is printed in flexible TPU and the rest in ecoPLA.
The 1/4-screw is held in place by a small piece of filament glued in place by CA-glue.
Support is recommended when printing camMount.
Using toothed washers with external-tooth is recommended for heavy setups but is otherwise not needed.
As always, if you find it useful a tiny donation goes a long way to show appreciation. :)
Hardware needed:
1 pcs M5x50 hex-head screw
1 pcs M5 nut
2 pcs M5x10 countersunk screws
2 pcs M5 Nyloc nuts
1 pcs 1/4 10mm screw (
http://www.amzn.de/dp/B00OOLKD3K
)
2 pcs M5 toothed washers (external-tooth)
Print instructions
See attached 3mf-file. I've printed successfully in PLA and PETG. Print the pad preferably in flex material like TPU.
If you like my designs please consider donating a coffee or any amount really, I appreciate the gesture.
https://www.paypal.com/donate/?hosted_button_id=QEF27KJ6FXGM6
