Showerhead Extension Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Standard Digital File License
[24/06/2019] Update: the pin that holds the showerhead, broke off on my print. To fix this problem, I drilled a 4mm hole through the pin and the mount, after which I inserted an M4 bolt for strength. If you are concerned about the strength of this part, you can print the reinforced .STL file, which includes a 4mm hole for an M4 bolt to be inserted into. I am in no way responsible if you end up in ER with a concussion ;)
I modelled this showerhead extender, because my showerhead was too close to the wall. The part is printed with 100% infill for high strength and has been designed in such a way that you don't need support material. If you want to bottom side of this extender to be a bit cleaner though, you could turn support on.
Support
If you'd like to support me for the 3D models I distribute for free, you can use my AliExpress affiliate link: https://s.click.aliexpress.com/e/_oFT8Gq6
Whenever you buy something through this link, I get a small kickback without costs for you ;)
Thanks for your support!
Print Settings
Printer Brand: Anycubic
Printer: All-metal Mega
Rafts: No
Supports: Doesn't Matter
Resolution: 0.2mm
Infill: 100%
Filament: ColorFabb PLA/PHA Blue Gray