1 / 4
Yet another filament spool holder - but with hexagons!
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My take on an simple filament spool holder.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 37
- Makes
- 0
- Views
- 279
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Two rollers, each with 2x bearing 626 (Do=19mm, Di=6mm, W=6mm).
Connected with a M6x100 (DIN912) hex screw and two washers (Din125, M6) on each side.
In the backpiece two square nuts DIN557 M6 are used.
You can mount two of these units back to back for e.g. dual extruders. Use the extra holes with M6x 25 screws and nuts
Fits for almost every size filament spool (10 - 80mm width) without adjustment, as only one side is guided on the rollers
I added hex patterns for 10% more coolness :)
I included the step files, if you want to change / remix it.
Have fun,
Sebastian