Waveshare CM4-NANO-B baseboard frame for Voron DIN-Rails
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.02 – €1.25 net (excluding VAT)
For file: cm4_din_frame_5mm_0.2mm_PLA_MINI_1h14m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.13 excluding VAT (range midpoint).
- Weight reported by the author
- 12 g
- Print time reported by the author
- 1.24 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Frame for the Raspberry Pi 4 compute module baseboard CM4-NANO made by Waveshare and DIN-Rails as used on Voron printers
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 73
- Makes
- 0
- Views
- 1,449
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution
Raspberry Pi 4 are hard to source. Using Raspberry CM4 modules together with a cheap baseboard can be a performant and compatible alternative.
The CM4-Nano baseboards are sub 20 euro, so they fit well. This is a relatively simple mount for DIN-rail mounts, but they can be modified super easy to be used on basically every printer or use case.
That's why I added the fusion 360 archive to make remixing simple.
Made for:
Waveshare CM4-Nano-B (and CM4-Nano-A): https://www.waveshare.com/CM4-NANO-B.htm
Heatsink with 10mm Height: https://www.waveshare.com/product/accessories/power-heat-sinks/heat-sinks/cm4-heatsink-b.htm
Heatsink with 5mm Height: https://www.waveshare.com/cm4-heatsink.htm
You need to print/order:
2x Prints of cm4_clip
2x M3 screws (6-8mm length)
1x Print of the Voron DIN-clip ( https://github.com/VoronDesign/Voron-2/blob/Voron2.4/STLs/Electronics_Bay/pcb_din_clip_x3.stl )
2x M2.5 (or M2) screws (5-6mm length)
1x Print of cm4_din_clip_frame_10mm or cm4_din_clip_frame_5mm, based on your cm4 heat sink height.
No supports needed. Use 3 vertical perimeters (3 walls for Cura users) to have enough strength.
Custom Sizes / Remixes:
If you want to make your custom frame, feel free to use the added fusion 360 archive. It utilizes the user parameter “Heatsink-height”, which makes custom height super easy. (See screenshot)