Ski wall holder
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€4.90 – €5.98 net (excluding VAT)
For file: stand_single_0.6n_0.3mm_PETG_MK3S_3h57m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.44 excluding VAT (range midpoint).
- Weight reported by the author
- 106 g
- Print time reported by the author
- 3.96 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
It is remix of Ski wall mount rack by mat7ej to have a lower risk of warping during 3D print.
- Rating
- 5 / 5
- Likes
- 16
- Downloads
- 128
- Makes
- 2
- Views
- 783
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Share Alike
Modified model of ski wall holder. Because I had a problem with warping of the original model (I printed from PETG), I did an improvement for better print, primarily to have a bigger surface on a printer pad and to have sharper features.
I also added .3mf files, I printed it by 0.6 nozzle, 0.30mm height layer, with 3 perimeters, 15% infill, 5mm brim and with modified infill (40%) on specified parts, where it was recommended in original model. I also added supports for connection parts.
Usage of distance blocks are described with original model – https://www.printables.com/cs/model/148988-ski-wall-mount-rack