Puck Wall Hanger w/ Hidden Fasteners
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A puck shaped wall hanger that has been designed to hide the fasteners securing it to the wall.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 18
- Makes
- 0
- Views
- 224
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted a neat looking hanger of some kind to hang my dogs harness on the wall and out of the way. I didn't like many of the hangers I found as they either used keyhole to secure the hook or the fasteners were completely visible.
I designed this two part disk with an arc shaped groove cut into the top to secure the harnesses. The two halves screw together completely hiding the fasteners. If you want to remove the hanger, you just unscrew the two halves and take it off the wall. I used screw in wall anchors to secure them to the wall. They are very sturdy and exactly what I was looking for.
You do need to mount the base to the wall in the correct orientation, the base has an arrow cut into it so you know the correct orientation for mounting. Arrow should point up :). The mounting holes are 25mm apart and sized for a #6 screw.