Spool holder for The Virtual Foundry composite filaments
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This design is a spool holder for the composite filaments from "The Virtual Foundry". Those filaments are brittle and…
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 14
- Makes
- 0
- Views
- 149
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This design is a spool holder for the composite filaments from "The Virtual Foundry".
Those filaments are brittle and need to be positioned in a specific position on top of your printer. This spool holder is designed to be attached to a 20*20 aluminum profile and provide minimum resistance by using ball bearings to hold the spool tightly.
To make this you will need 9 Ball Bearings 624 (4X13X5mm) and 15 M3 screws (10 to 20mm). I can provide a model using M4 screws if asked.
You will also need 4 M5X10 screws and T nuts to attach to the aluminum profile.
The virtual foundry spools have a center diameter of 66mm and this design will not work well with smaller spools (most of them).
Category: 3D Printing