1 / 6
Wall Mount for Bosch Unlimited Series 8 Vacuum Cleaner (V2) — image 1
1 / 6

Wall Mount for Bosch Unlimited Series 8 Vacuum Cleaner (V2)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A wall mount to attach a Bosch Unlimited Serie 8 cordless vacuum cleaner to a a wall

Rating
0 / 5
Likes
9
Downloads
174
Makes
0
Views
2,307
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

This is a wall mount to attach a Bosch Unlimited Series 8 cordless vacuum cleaner to a wall.

  • Large screw access holes big enough for bit drivers

  • Compact

  • Very sturdy

  • STEP files available for easy remixing

Looking for a mount for Ikea Skadis instead? Check out the Bosch Unlimited Series 8 Skadis Mount.

Required Hardware

Qty

Description

3

Pan head or countersunk screws either 3.5, 4.0, or 4.5mm in diameter and ideally at least 25mm in length. Or any Imperial equivalent (6, 8, or 9 gauge)

 

Printed Files

There are separate files for each screw head type and diameter. Check your screws and download the correct one.

Head Type

Screw Diameter

File Name

Pan head

3.5mm / No. 6

Bosch Unlimited S8 Wall Mount PH 3.5.stl

Pan head

4.0mm / No. 8

Bosch Unlimited S8 Wall Mount PH 4.0.stl

Pan head

4.5mm / No. 9

Bosch Unlimited S8 Wall Mount PH 4.5.stl

Countersunk

3.5mm / No. 6

Bosch Unlimited S8 Wall Mount CS 3.5.stl

Countersunk

4.0mm / No. 8

Bosch Unlimited S8 Wall Mount CS 4.0.stl

Countersunk

4.5mm / No. 9

Bosch Unlimited S8 Wall Mount CS 4.5.stl

 

Printing

Print the parts in the original orientation. All STL files are pre-rotated for printing.

Print Settings

  • Material: ASA, PETG, PLA, etc

  • Layer height: 0.2mm

  • Extrusion width: 0.4mm 0r 0.45mm

  • Perimeters: 3 or more

  • Infill: 20% or more

 

Installation

In case you need to pre-drill the holes, they are spaced 30mm horizontally and 25mm vertically. Use the correct wall anchor for your mounting surface type.

Updates

2025-11-01 - V2

Update that prevents the mount from sliding too deep into the vacuum cleaner's mounting slot, causing it to fit too tightly or get stuck. The new version has a stopper post at the bottom that prevents sliding in too deep, as well as flatter ramp at the top to prevent snagging.

 

Additional Credits

The 3D model of the screws used in the assembly instructions are from Jimmi Henry on GrabCAD.

Tags