1 / 2
Bolt Arm Jigs for SLAB CALIBURN TALON CLAW
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Jigs for the aluminum bolt arms in the Caliburn, Talonclaw and SLAB
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 59
- Makes
- 0
- Views
- 380
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
If your like me and sourced your own hardware for your blasters then you might find these useful. They're jigs for drilling the holes in the aluminum bolt arms for the Caliburn Talon Claw and SLAB etc. There is 2 plates a top and a drill block to help you keep your holes straight down. I use the jig to mark the holes and the block to drill them. PLA is fine and print with I would just do %20 infill with 5 walls on the jigs but everything else at %100. Hope you guys find this usefull.