1 / 2
Bolt Arm Jigs for SLAB CALIBURN TALON CLAW
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Jigs for the aluminum bolt arms in the Caliburn, Talonclaw and SLAB
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 380
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (21)Powiązane
If your like me and sourced your own hardware for your blasters then you might find these useful. They're jigs for drilling the holes in the aluminum bolt arms for the Caliburn Talon Claw and SLAB etc. There is 2 plates a top and a drill block to help you keep your holes straight down. I use the jig to mark the holes and the block to drill them. PLA is fine and print with I would just do %20 infill with 5 walls on the jigs but everything else at %100. Hope you guys find this usefull.