Kinu m47 Pheonix Magnetic Catch Cup
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Catch cup for Kinu m47 Pheonix coffee grinder with slots for magnets to be glued in
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 67
- Makes
- 1
- Views
- 612
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
This is a catch cup for the Kinu m47 Pheonix coffee grinder with slots for magnets to be glued in. I used 3mm x 3mm magnets which can be found on amazon.
Print this with no supports and a layer height that gives you your desired surface finish (I did .1mm layer height).
Stack 2 magnets on top of each other for each hole and glue them in. (24 total magnets used out of a pack of 600). This resulted in a strong hold.
Please feel free to donate if you loved my work!
-Magnets Amazon Link -
https://www.amazon.com/dp/B092MCQ3NL?ref=ppx_yo2ov_dt_b_product_details&th=1