Zeitschriftenhalter / magazin holder
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€16.80 – €20.54 net (excluding VAT)
For file: Zeitschriftenhalter Toilette Klebebereich_0.25mm_PLA_MINI_15h1m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €18.67 excluding VAT (range midpoint).
- Weight reported by the author
- 310 g
- Print time reported by the author
- 15.01 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Zeitschriften elegant aufbewahren. / store magazines elegantly
- Rating
- 5 / 5
- Likes
- 14
- Downloads
- 78
- Makes
- 1
- Views
- 773
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Auch kein Freund von 0815 Zeitschriftenhalter, hier eine Möglichkeit 3 Zeitschriften in der Toilette aufzubewahren.
Erste Lage bis ca. 180 Seiten möglich. (GEO mit 168 Seiten kein Problem)
Zweite und dritte Lage bis ca. 120 Seiten möglich.
Um die Fliesen nicht anbohren zu müssen, habe ich mich für Klebestreifen entschieden.
Die Version am Foto hat keine Ausnehmungen an der Rückseite, ich habe aber sehr dünnen Klebestreifen verwendet.
Wenn jemand etwas dickere Klebestreifen verwendet, findet eine weitere Datei mit 3 Ausnehmungen (links & rechts) 140 mm x 22 mm, (mitte) 150 mm x 22 mm.
---
Looking for a special magazin holder?Here is a possibility to store 3 magazines.
First layer up to approx. 180 pages possible. (GEO with 168 pages no problem)
Second and third layer up to approx. 120 pages possible.
In order not to have to drill into the tiles, I decided to use adhesive strips.
The version on the photo has no cut-outs on the back, but I used very thin adhesive strips.
If someone uses slightly thicker tape, find another file with 3 cut-outs (left & right) 140 mm x 22 mm x 0,2 mm, (middle) 150 mm x 22 mm x 0,2 mm.