1 / 5
L3K to Bowden Adapter — image 1
1 / 5

L3K to Bowden Adapter

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

I want to change my current prusa clone from geared direct to bowden, but I don't really want to move away from my…

Rating
0 / 5
Likes
0
Downloads
22
Makes
0
Views
303
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

I want to change my current prusa clone from geared direct to bowden, but I don't really want to move away from my geared extruder setup and move to an mk8 setup. I wasn't able to find this exactly, a couple alternatives but they didn't exactly work.

So, through the magic of some fusion360 and some 3D Printing, this adapter was born.

It mimics a typical jhead/e3d v6 style hotend so that it can be mounted directly into the extruder, as if it were a real hotend.

I designed it to be used with my current ptfe coupler that has a thread of 5.7mm in diameter and 4mm in length (aprox.). The inner diameter is 2.2mm (where filament passes through) and the coupler hole is 6mm in diameter.

Should also work with Greg's extruder body I think.

Now I only need to find a way to mount the usual L3K body to somewhere in my clone.

Print instructions

Print Settings

Printer Brand: DIY
Printer: Prusa Clone
Rafts: Doesn't Matter
Supports: No
Resolution: 0.2
Infill: 20

Notes:

Infill could be lower as well, depends on your printer.

Tags