1 / 2
ESP32 CAM Photo Trap — image 1
1 / 2

ESP32 CAM Photo Trap

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Estimated printing price per file

€4.03 – €4.93 net (excluding VAT)

For file: ESP32_CAM _Phototrap_PLA_MINI_4h43m.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €4.48 excluding VAT (range midpoint).

Weight reported by the author
51 g
Print time reported by the author
4.72 hr
Source material
PLA
Estimate material
PLA
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

Bird camera trap outside the window

Rating
5 / 5
Likes
24
Downloads
66
Makes
1
Views
869
Reviews
1

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution

The model serves me as a camera trap for ESP32 CAM. It is stuck to the window with double-sided tape and pointed at the bird feeder. It is adjustable in three axes. There are protrusions on the inside, under which the printed circuit board is inserted after the lens is placed. M3 threads must be cut into the holes and plastic screws must be used. After programming, the USB connector is no longer used and only two wires for power supply are brought out.

Tags